FA-IOC-GJPFJV12, 12 Fibers Bundle Indoor Fiber Optic Cable With 0.9mm Breakout And LSZH Jacket

How to judge the quality of optical fiber cable

Outer Jacket: Indoor cables generally use polyvinyl chloride or flame retardant polyvinyl chloride as sheath, the surface of the jacket should be smooth, shiny, flexible and easy to strip. Jacket smoothness of poor quality fiber optic cable is not good, and easy to adhere to the tight buffer and aramid;

Fiber cable manufacturer always A grade fiber, some low-quality cable may use C and D class optical fiber or some optical fiber with unknown source, due to complicated sources and long time unused, the fiber may be damp and discoloration, or multimode fiber mixed with single-mode fiber, and small factory do not have test equipment to judge the quality of optical fiber. Naked eye can not distinguish the poor quality fiber, so it may happen quality problem during use, such as bandwidth is narrow, transmission distance is short , uneven thickness, and can not be connected with pigtail, lack of flexibility, broken when is bended and so on.

Reinforcing steel wire: the steel wire must be treated by phosphating, the surface is grey, so the steel wire does not increase hydrogen loss when it is finished, and it is not rusty and with high strength. Poor quality fiber optic cable usually replaced by thin wire or aluminum wire. It is easy to identify the poor quality strength member, the surface is white, and it can be bent freely on the hands. The fiber optic cable produced with such steel wire has a large hydrogen loss, after long time use, both ends of the optical fiber box will rust and break.

Aramid : also known as Kevlar, is a kind of high intensity chemical fiber, a lot of indoor cable use aramid as reinforcement, aramid fiber is with high cost, so poor indoor cable always with small diameter so few kevlar is used and cost is saved. Such cables with few aramid are easily broken when they are worn through the tube. Some manufacturers even use glass yarns or other similar fibers instead of using Kevlar.

Features Of FA-IOC-GJPFJV12

Suitable for building to building cabling;

Can be installed along wall, ceiling, conduct and so on;

Can be pre-terminated with fiber connector and made to be pigtail and patch cord;

With aramid yarn as reinforcement and non-metallic;

Maximum 48 tight buffer breakout and convenient for high dense communication.

Main Parameters

Fiberall Technology (Shenzhen) Co., Ltd was started in 2007 and we are located in Shenzhen China. As a company engaged in fiber optical engineering related products, our main business including: research and development (R&D), manufacturing, marketing; optical engineering solution design; maintenance, consulting service and accessories outsourcing.

Our main products are: All kinds of Fiber PLC Splitters, FBT Couplers, Fiber Cable Assemblies, Patch Cords, Fiber Pigtails, Fiber Adapters, Patch Panels, Fiber Optical Transceivers, OLT (Optical Line Terminal), ONU (Optical Network Unit), FTTx, Equipments & Accessories for Fiber Test, Installation, Maintenance & Repair.

With eight years’ experience in fiber optic, Fiberall established a relatively perfect products and service system, with rich industry experience, comprehensive technology and high-quality team, we are able to provide our customers with OEM & ODM service, project implementation, maintenance, and after-sale service and we have ability to meet different requirement from different customers like distributors, operators, contractors and users etc.

Adhering to the core values of “Honesty, Responsibility, Efficiency, Flexibility, Communication, Mutual Benefit”, and with trust from all old & new customers, support from all partners and effort of our whole team, Fiberall gradually formed a business model of "service to project, based on the market, integrate design, production, marketing and service together", we are committed to providing a full range, high technology, low cost, and ultra expected solution to our customers.