FTTH OUN For EPON Multi Service With 4 FE Ports 2 POTS And 1 CATV
Port
FA-EONU8067 (4FE+2POTS+1CATV) is a EPON terminal product which is
designed to meet the needs of SOHO broadband access, FTTH broadband
speed, fiber to the home (FTTH) / fiber to the desktop from the
cable TV operators. The equipment is based on stable and high
performance Gigabit EPON technology, integrated Gigabit Ethernet
switching technology, CATV, WDM and VoIP technology. It is with
high reliability, easy management and excellent quality of service
(QoS) and it complies with IEEE802.3ah international standard and
China Telecom EPON Technical Requirement 2.1/3.0.
Product Main Features Of FA-EONU8067
Data Services
Full speed nonblocking switching
1K MAC address
Supports 64 Full Range VLAN ID
Support QinQ VLAN, 1:1VLAN, VLAN Trunk and other functions
With Port monitoring, port mirroring, port line speed, port SLA and
other functions
QoS based on port, IEEE802.1p, IPv4 service type (ToS) or
differentiated services (Diff-Serv), IPv6 traffic classes, 802.1Q
VLAN ID, destination MAC address or MAC source address
Ethernet interface conforms to IEEE 802.3 specification
Support 128-bit AES encryption algorithm
Meets requirement of 802.1x remote management and user
authentication
Telephone Service
Support SIP protocol and H.248, H.323 is optional
Support ITU-T G.711, G.723.1, G.729 three compression algorithms
Echo cancellation conforms to ITU-T G.168-2002, length of echo
canceller is 128ms
Support transparent transmission and T38 fax
Support RFC2833 and redundant RFC2833, differentiated ringing, MD5
authentication, call forwarding, call waiting, hot line, alarm
clock, dial up and other value-added services
Support three calls at the same time in 2 POTS interface and
supports local sound mixing
Support POTS port GR909 line test function
Support dynamic PPPoE, DHCP and static IP
Support CTC2.1 standard
7 x 24 hours call loss is less than 0.01%
Technical Parameters
| Items | Parameters | Specifications |
| Fiber Port | Speed Rate | Downlink1.25 Gbps Uplink 1.25 Gbps |
| Optical specifications | Downlink Wavelength:1490nm+/-20nm Minimum receiver sensitivity:-27dBm Receive saturation power:-3dBm Uplink Wavelength:1310nm+/-50nm Minimum output optical power:0dBm Maximum output spectral width (-20dB):3nm |
| Max. User No. | Maximum 32 users in 20KM |
| Fiber Connector | SC/APC |
| Optical physical conditions | IEEE802.3-2005 1000 BASE-PX20+ |
| Fiber type | G.652 SM |
| Ethernet interface specification | Standards | IEEE802.3 IEEE802.3au IEEE802.3x |
| Port No. | 4 FE |
| Interface | RJ-45 |
| Impedance | 100 Ohm |
| LAN | IEEE 802.3 10/100BASE-T Automatic negotiation Full duplex/Half duplex Support RJ-45 MDI/MDIX |
| VLAN | IEEE802.1q |
| Max. Distance | 100m |
| CATV Interface | Receiving Wavelength Range | 1550±10nm |
| Return Loss | >45dB |
| Input Optical Power | +2dBm～-8dBm |
| RF Interface | Working Bandwidth | 45～1000MHz |
| RF Output level | 80dBuV |
| In band flatness | ±1.5 dB |
| RF Output Return Loss | ≥14dB |
| Power | ≤13W |
| Input Voltage | 100V～240V AC,50 Hz/60Hz |
| Output Power | 12V±10%,2A |
| EMC and Safety | electromagnetic compatibility | EN55022 B Grade(CISPR 22B) |
| ESD Protection | IEC 61000-4-2GR-1089-CORE |
| Laser Safety | FDA 21CFR 1040.10 and 1040.11 EN(IEC) 60825-1 EN(IEC) 60825-2 |
| RoHS | Yes |
| Environment Requirements | Operating Temperature | -5ºC~55ºC |
| Storage Temperature | -30ºC~60ºC |
| Operating Humidity | 10%~90%,( Non condensing) |
| Storage Humidity | 5%~95%,( Non condensing) |
| Physical Spec. | Dimension | L x W x H:245 mm x 150 mm x 37mm |
| Weight | <500g |
